ADNOC Bitumen
Last updated: 2026-10-07
本内容由 AI 生成，仅供研究参考。价格、产量等数据为估算值，交易前请核实最新行情与规格。
ADNOC Bitumen: Grades, Prices, and Export Guide for 2025
ADNOC Bitumen refers to penetration-grade and polymer-modified bitumen produced and marketed by the Abu Dhabi National Oil Company (ADNOC), primarily through ADNOC Refining and its Ruwais refining complex. Standard grades include 60/70, 80/100, 40/50, and PG 64-22, with bulk export volumes commonly moving in 5,000–30,000 MT parcels and FOB Fujairah/Jebel Ali pricing in 2025 typically ranging $380–$520 per MT depending on grade, season, and destination. ADNOC supplies roughly 1.5–2 million MT per year of bitumen-grade material, making it one of the largest single-origin bitumen sources in the Middle East.
ADNOC Bitumen Grades and Specifications
ADNOC's penetration grades follow ASTM D946 / AASHTO M20 and equivalent Gulf standards. The table below summarizes the most-traded export grades and their typical specification windows.
| Grade | Penetration @25°C (0.1 mm) | Softening Point (°C) | Flash Point (°C) | Typical Use |
|---|---|---|---|---|
| 40/50 | 40–50 | 52–58 | ≥232 | High-traffic highways, hot climates |
| 60/70 | 60–70 | 49–56 | ≥232 | General paving, Middle East & Africa |
| 80/100 | 80–100 | 45–52 | ≥220 | Moderate climates, base courses |
| PG 64-22 | — | Performance-graded | ≥230 | US-spec highway projects |
| PMB (Modified) | 50–70 (base) | 60–75 | ≥230 | Bridges, airports, heavy loading |
- Penetration grades dominate ADNOC's export mix (~75% of volume).
- PG-graded material is produced to order, typically with 3–4 week lead times.
- PMB volumes are smaller but growing, especially for Gulf infrastructure tenders.
Pricing: ADNOC Bitumen vs. Regional Benchmarks
ADNOC bitumen is priced off FOB Ruwais / Fujairah and is benchmarked against Iranian, Iraqi, and Bahraini material. Prices move with crude (Brent) and are quoted per MT in bulk.
| Origin | Grade 60/70 FOB ($/MT), Q1 2025 | Grade 80/100 FOB ($/MT) | Payment Terms |
|---|---|---|---|
| ADNOC (UAE) | 445–475 | 430–460 | LC at sight / TT |
| Iran | 400–430 | 385–415 | LC / TT, sanctions-sensitive |
| Iraq | 415–445 | 400–430 | LC at sight |
| Bahrain | 450–480 | 435–465 | LC at sight |
| Singapore (resale) | 480–520 | 465–505 | LC at sight |
- ADNOC typically trades at a $15–$30/MT premium over Iranian material due to consistent quality and clean logistics.
- Barges from Fujairah load in 2–4 days; Jebel Ali drummed cargo takes 5–7 days.
- Drummed (new steel drum, 150–182 kg) pricing runs $40–$70/MT above bulk.
Cost example: a 10,000 MT cargo of ADNOC 60/70 at $460/MT FOB Fujairah = $4.6M cargo value, plus freight to West Africa (~$45–$65/MT) and insurance.
Logistics, Ports, and Lead Times
ADNOC bitumen reaches export markets via bulk vessels, ISO tanks, flexitanks, and steel drums. The main channels are:
| Mode | Capacity per Unit | Best For | Lead Time |
|---|---|---|---|
| Bulk vessel | 5,000–30,000 MT | Large refinery-to-port trades | 10–21 days |
| ISO tank | ~24 MT | Small distributors | 7–14 days |
| Flexitank | ~22–24 MT | Cost-sensitive buyers | 7–14 days |
| Steel drum | 150–182 kg | Retail / remote sites | 10–20 days |
- Fujairah is the primary bulk loading hub; Jebel Ali and Khalifa Port handle containerized/drummed cargo.
- Documentation set: BL, COO, COA, MSDS, packing list, insurance certificate.
- Typical export payment: irrevocable LC at sight or 30% TT advance + 70% against BL copy.
Quality Control and Certifications
ADNOC bitumen ships with a Certificate of Analysis (COA) per batch, tested at ADNOC Refining laboratories and often third-party verified (SGS, Intertek, Bureau Veritas).
- Tests include penetration, softening point, ductility, flash point, solubility, and specific gravity.
- ISO 9001 quality systems apply across the Ruwais complex.
- ASTM D946 / AASHTO M20 / EN 12591 compliance is standard for export grades.
- Buyers should always request a pre-shipment sample and independent lab confirmation.
ADNOC Bitumen vs. Alternatives: Quick Comparison
| Factor | ADNOC | Iranian | Singapore Resale |
|---|---|---|---|
| Price | Mid-high | Low | High |
| Quality consistency | High | Variable | High |
| Sanctions risk | None | High | None |
| Lead time | 7–21 days | 10–30 days | 5–15 days |
| Best for | Gulf, Africa, South Asia | Price-sensitive markets | Urgent spot needs |
FAQ: ADNOC Bitumen
1. What is ADNOC bitumen?
ADNOC bitumen is penetration-grade and polymer-modified bitumen produced by ADNOC Refining in the UAE, mainly at Ruwais. It is exported in grades such as 60/70, 80/100, and 40/50 under ASTM/AASHTO specifications.
2. What is the price of ADNOC bitumen in 2025?
FOB Fujairah/Jebel Ali pricing for 60/70 has ranged $445–$475/MT in Q1 2025, with 80/100 at $430–$460/MT. Prices track Brent crude and shift monthly, so always request a current quotation.
3. Which ADNOC bitumen grade is best for hot climates?
40/50 is best for hot climates and heavy traffic because its higher softening point resists rutting. 60/70 is the most common general-purpose grade across the Gulf and Africa.
4. How long does ADNOC bitumen shipping take?
Bulk cargo loads in 2–4 days at Fujairah and delivers to West Africa in 18–28 days or South Asia in 7–14 days. ISO tank and flexitank shipments add 7–14 days of inland handling.
5. How do I calculate the cost of an ADNOC bitumen order?
Multiply tonnage by the FOB price, then add freight, insurance, and port charges. For a 10,000 MT cargo at $460/MT, the base cargo value is $4.6M before logistics.
Calculate Your ADNOC Bitumen Cost Instantly
Use the 6Tar cost calculator to get a landed-cost estimate for any ADNOC bitumen grade, volume, and destination in seconds. Enter your tonnage, grade, and port, and get freight, insurance, and total delivered cost — accurate enough for budgeting and tenders.