Cost Of Mc-30 Bitumen
Last updated: 2026-10-18
本内容由 AI 生成，仅供研究参考。价格、产量等数据为估算值，交易前请核实最新行情与规格。
Cost Of Mc-30 Bitumen
The cost of MC-30 bitumen ranges from $480 to $620 per metric ton FOB depending on origin, with US Gulf Coast material averaging $545/ton and Middle East imports landing at $490–$530/ton in Q1 2025. A standard 20-ton tanker load therefore costs between $9,600 and $12,400, while bulk rail shipments of 85 tons run $41,000–$52,700. Prices fluctuate ±8–12% quarterly, driven primarily by cutter solvent (naphtha/kerosene) costs, which represent 35–45% of the total MC-30 price.
What Determines MC-30 Bitumen Prices?
MC-30 is a medium-curing cutback bitumen — penetration-grade asphalt cement thinned with 30–40% kerosene-type solvent. Its price is a composite of three cost layers:
| Cost Component | Share of Total Price | Q1 2025 Range |
|---|---|---|
| Base asphalt cement (AC-20/AC-30) | 50–58% | $260–$340/ton |
| Cutter solvent (kerosene/naphtha) | 35–45% | $180–$260/ton |
| Blending, packaging, logistics | 7–12% | $45–$70/ton |
Key price drivers:
- Crude oil benchmark (WTI/Brent): Every $10/bbl move in Brent shifts MC-30 by roughly $28–$35/ton
- Naphtha crack spreads: Solvent scarcity in winter raises cutback prices 6–10%
- Origin and specification: AASHTO M82-compliant material from certified refineries carries a $25–$45/ton premium
- Order volume: Full truckloads (20–24 tons) price 4–7% below LTL quantities
- Seasonality: Q2 construction ramp-up pushes prices up 5–9% versus Q4
MC-30 Bitumen Price Comparison by Origin (Q1 2025)
Regional pricing varies significantly due to freight, refinery economics, and specification compliance:
| Origin | FOB Price/Ton | Freight to US East Coast | Delivered Cost/Ton | Lead Time |
|---|---|---|---|---|
| US Gulf Coast | $530–$560 | $35–$50 | $565–$610 | 5–10 days |
| Middle East (UAE) | $460–$490 | $65–$95 | $525–$585 | 25–35 days |
| Southeast Asia (Singapore) | $475–$505 | $80–$110 | $555–$615 | 30–40 days |
| South America (Brazil) | $500–$530 | $50–$75 | $550–$605 | 15–22 days |
| Europe (Rotterdam) | $540–$575 | $55–$80 | $595–$655 | 20–28 days |
Key takeaway: Middle East FOB pricing looks lowest, but 30-day lead times and freight volatility often erase the $40–$70/ton advantage on delivered cost.
Cost Per Project: MC-30 Quantities and Budgets
MC-30 application rates depend on use case. Below are typical project-scale cost calculations at $545/ton (US Gulf Coast delivered average):
| Application | Coverage Rate | Project Size | MC-30 Needed | Estimated Cost |
|---|---|---|---|---|
| Prime coat (road base) | 1.0–1.5 L/m² | 10,000 m² | 10–15 tons | $5,450–$8,175 |
| Tack coat | 0.3–0.5 L/m² | 10,000 m² | 3–5 tons | $1,635–$2,725 |
| Dust palliative (gravel road) | 1.5–2.0 L/m² | 5,000 m² | 8–10 tons | $4,360–$5,450 |
| Cold-mix patching binder | 5–7% by weight | 500 tons mix | 25–35 tons | $13,625–$19,075 |
| Prime + seal program | Combined | 1 km × 7 m road | 12–18 tons | $6,540–$9,810 |
- Add 8–12% for drum packaging versus bulk tanker delivery
- Include 3–5% contingency for solvent evaporation loss and spillage
- Storage beyond 30 days requires covered, ventilated tanks — budget $0.50–$0.80/ton/month
MC-30 vs. Alternative Bitumen Products: Cost Benchmark
Buyers often weigh MC-30 against RC-250, SS-1, and PG binders:
| Product | Price/Ton (Q1 2025) | Cure Speed | Best Use Case | Cost Delta vs. MC-30 |
|---|---|---|---|---|
| MC-30 | $480–$620 | Medium | Prime/tack coats, cold climates | Baseline |
| RC-250 | $520–$660 | Rapid | Patching, immediate traffic | +$30–$45 |
| SS-1 (emulsion) | $390–$480 | Slow | Environmentally sensitive sites | −$90–$140 |
| PG 64-22 | $440–$520 | N/A (hot mix) | Structural asphalt layers | −$40–$100 |
| MC-70 | $470–$600 | Medium-slow | Heavier prime applications | −$10–$20 |
Note: Emulsions (SS-1) are cheaper per ton but contain 30–35% water, so effective binder cost is comparable to MC-30 when adjusted per ton of residual asphalt.
What Is Included in Delivered MC-30 Pricing?
A delivered quote should itemize these line items — verify each before signing:
- Material cost: FOB refinery price per ton
- Freight: Tanker, rail, or ISO-tank rates (bulk MC-30 is classified as flammable liquid, UN 1999)
- Hazmat surcharges: $15–$40/ton on most lanes
- Heating en route: $8–$15/ton if ambient temperature drops below 10°C
- Documentation: SDS, COA (Certificate of Analysis), AASHTO M82 compliance cert — usually free
- Demurrage risk: $75–$150/hour if unloading exceeds free time (typically 4–6 hours)
- Payment terms impact: 30-day net terms typically add 1.5–2.5% to invoice price
FAQ: Cost Of MC-30 Bitumen
What is the current price of MC-30 bitumen per ton?
As of Q1 2025, MC-30 bitumen costs $480–$620 per metric ton FOB, with US Gulf Coast delivered pricing averaging $545–$610/ton. Middle East imports typically land at $525–$585/ton delivered to US ports.
How much does a 20-ton load of MC-30 cost?
A 20-ton tanker load costs $9,600–$12,400 depending on origin and freight, with the US Gulf Coast average around $10,900 delivered. Bulk rail shipments of 85 tons run $41,000–$52,700.
Why is MC-30 more expensive than straight-run asphalt cement?
MC-30 contains 30–40% kerosene-type cutter solvent, which costs $180–$260/ton and represents 35–45% of the product price. This makes MC-30 roughly $120–$200/ton more expensive than PG-graded asphalt cement.
How often do MC-30 prices change?
Prices typically adjust quarterly with ±8–12% swings, but can move weekly during crude volatility or solvent shortages. Lock in pricing with 60–90 day forward contracts for projects exceeding 100 tons.
What is the cheapest way to purchase MC-30 bitumen?
Bulk tanker delivery from a US Gulf Coast refinery offers the lowest delivered cost at $545–$575/ton for 20+ ton orders. Buying full ISO-tank quantities (24 tons) directly from refineries avoids distributor markups of $30–$60/ton.
Get an Instant MC-30 Cost Estimate with 6Tar
Stop chasing emailed quotes that take 48 hours. [Use the 6Tar cost calculator](https://6tar.com) to generate a delivered MC-30 price breakdown in under 60 seconds — input your tonnage, delivery port, and packaging type, and get:
- Live FOB and delivered pricing against Q1 2025 benchmarks
- Freight, hazmat, and heating surcharge line items
- Volume discounts automatically applied at 20, 85, and 200+ ton thresholds
- Export-ready quotes (FOB/CIF/CFR) for cross-border procurement
Calculate your MC-30 bitumen cost now — no registration required, results in USD per ton and per project.